01
Prepping the base for sandy soil
We level and compact the base over Central Florida's sand, clay lenses, and limestone so the slab carries weight uniformly and stays put once a load comes down on it.
Proof
A job we'd put our name on
A pad scaled to whatever ends up on it and built for the ground beneath it: reinforced with fiber and welded wire mesh for the load, and drained so the rainy season and a soft clay lens leave it be.
Credibility comes from how it's built, not from promises. Here's the order of operations on every concrete pads & slabs job.
We level and compact the base over Central Florida's sand, clay lenses, and limestone so the slab carries weight uniformly and stays put once a load comes down on it.
Slab depth answers to whatever sits on top. A shed pad and a vehicle-bearing shop floor are not the same animal, and we pour each to its own number.
Most pads run on structural fiber and welded wire mesh, the standard for Florida flatwork. We move up to a steel rebar grid only for genuinely heavy or structural loads, since that is what rebar is built for, not light residential pads.
Under enclosed or heated slabs we lay a vapor barrier against ground moisture, and we shape the surrounding grade so storm water sheds off rather than soaking into the base and softening it.
We place the mix, saw the control joints, and cure with Orlando's heat and humidity in mind so the slab sets evenly all the way across.
Most contractors vanish after the deposit. We pick up the phone, show up when we say, and stand behind the work after the truck leaves. The follow-through is the difference.
A foreman we know runs your job and a vetted crew does the work, managed by Lucky's, one company accountable from the first call to the final walkthrough.
COI and lien waivers on file before we break ground. The documentation that lets commercial clients pay and gives homeowners peace of mind.
Prepped subgrade, reinforced and mixed to spec for the job, and proper curing. We build credibility through the process, not promises. On concrete pads & slabs, that starts with prepping the base for sandy soil.
Pads and slabs price to the load and the ground: reinforcement scaled to the use, a sandy base compacted through its clay lenses, and grading so storm water sheds off. As a starting range, most pads and slabs run about $7 to $13 per square foot, depending on thickness and whether a vapor barrier is in the mix. We size it and price it to the load that pad will have to carry.
For most home pads we use structural fiber blended into the mix and welded wire mesh through the slab, the standard Florida flatwork build. For genuinely heavy or structural loads, say a shop floor taking trucks, we step up to a steel rebar grid, since that is the job rebar exists for. We size the reinforcement to the real load rather than over-building light pads with steel they get nothing from.
That follows the load. A shed pad carries a fraction of what a garage or shop floor holding vehicles and gear does, so we match thickness and reinforcement to your actual use and account for the sandy ground and its clay lenses underneath.
Yes. Those are heavy, concentrated loads, so we build up the thickness and the reinforcement, going to rebar where the load genuinely warrants it. A hot tub also wants a level base that won't budge as the sandy ground wets and dries, which puts drainage on par with the steel. Name the equipment and we shape the pad to carry it.
For enclosed or heated slabs, usually yes, because damp Central Florida ground pushes moisture up through concrete. We make that call from what the slab is going to do.
Some do, depending on size, placement, and use, and the rules shift across Orange County and the jurisdictions around it. We flag when a permit looks likely so it gets handled up front instead of surfacing later.
You'll hear back from a real person, usually the same day. No call center, no runaround, no chasing us down.
Booking up fast this season. Or call (407) 720-6662